TOA Electronics Home Theater Server D1440901 User Manual

What’s in this guide?  
Getting started  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
TANDn 2.0  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
1
 
What’s in this guide?  
Gettingstarted  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
System requirements  
Read this before you start  
Processor  
Movi is a PC application that makes it possible for you to do video  
conferencing directly from your PC without any separate video conferencing  
equipment.  
Any processor supporting SSE2 (e.g. Pentium IV) or better.  
Memory  
512MB RAM or more.  
Operating System  
How to use this document  
Windows XP SP2 and later or Windows Vista.  
The pages are organized in a sequence that reflects what we think you would  
like to start with after you have signed in for the first time. You can also use  
the table of content and search for the action you want to perform.  
Connection IP network connection (broadband, LAN, wireless)  
At least 64 kbps for audio connection, or at least 128 kbps for video  
connection.  
Sound card  
Before you start  
Full-duplex, 16-bit or better.  
Have the Movi software installed. This is usually made available to you by the  
administrator of your company’s IT department. The administrator will have  
assigned to you a user name and a password.  
Multimedia device requirements  
To have video and audio during your calls with Movi, you need a web  
camera/microphone installed on your PC.  
Microphone  
Every microphone works well with Movi. Be aware that some cameras  
have built in microphones.  
For Movi to work, you need to have the application open and be signed in.  
Camera  
Movi works with most common web cameras.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
3
 
 
What’s in this guide?  
Gettingstarted  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
Sign in  
Before you start, you need:  
A mail from your administrator with the address and instructions on how to  
download the Movi application.  
A webcam/microphone connected to your PC.  
The process of signing in  
Follow these steps to sign in:  
1
1. Enter your User name e.g. firstname.lastname.  
2. Enter your Password.  
3. Select Remember my User name or Remember my Password if you want  
this service from Movi. Take into consideration your company’s security  
policy, if you share computer with someone else.  
4. Click Sig n in.  
Forget me  
The link Forget me clears username and password fields in the Sign in  
window. This makes it possible for a different user to quickly clear the fields  
and sign in to Movi  
1
Sign in with a different presence status  
This button makes it possible for you to sign in with the presence status of  
you own choice. For more information on presence, see section Presence in  
Movi  
2
To sign out or exit Movi  
To sign out, click the Pr e S e n c e button and select Sig n o u t . Sign out keeps  
your Movi active.  
2
To sign out and exit Movi, click the Pr e S e n c e button  
and select ex i t.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
4
 
 
What’s in this guide?  
Getting started  
Makingcalls  
Adjusting Movi  
Settings  
Troubleshooting  
Start making calls  
1
Make a call with the Search field  
1
2
By entering a name in the Search field, Movi sends a query request to the  
database and displays matching results.  
To make a call:  
1. Start entering the name in the Search field.  
2. Select name  
3. Click the ca l l button, double-click the name or press en t e r  
If the person you are calling is present and accepts the call, the call will be  
set up.  
2
Make a call by using the My contacts button  
My contacts is a list you make yourself. To add to the My contacts list, see  
the section Add a contact to My contacts list.  
To make a call:  
1. Click My c o n t a c t S  
2. Select name.  
3. Click the ca l l button, double-click the name or press en t e r  
If the person you are calling is present and accepts the call, the call will be  
set up.  
3
3
End a call  
When the call is over, click the en d c a l l button. The remote side (the called  
person) can also end the call.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
5
 
 
What’s in this guide?  
Getting started  
Makingcalls  
Adjusting Movi  
Settings  
Troubleshooting  
1
Make a call by using the Recent calls button  
Recent calls is a list of your latest calls.  
To make a call:  
1. Click re c e n t c a l l S  
2
1
2. Select name.  
3. Click the ca l l button, double-click the name or press en t e r  
If the person you are calling is present and accepts the call, the call will be  
set up.  
2
Make a call by using a SIP URI  
By typing a SIP URI in the Search field, you can directly dial to another Movi,  
endpoint or a conference.  
3
Incoming calls  
When someone calls you, Movi displays a pop-up window above the SysTray  
that gives you the possibility to answer, reject or ignore the call.  
Click an S w e r and the call will be set up.  
Click re j e c t if you do not wish to accept the call.  
Use the x (Close) in the upper right corner of the pop-up window to ignore  
an incoming call. Ignoring an incoming call does not show the caller that  
you have ignored the call.  
Clear the Recent calls list  
3
To clear the re c e n t c a l l S list, click the re c e n t c a l l S button and click the link  
cl e a r h iS t o r y in the lower right corner of the list.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
6
 
 
What’s in this guide?  
Getting started  
Makingcalls  
Adjusting Movi  
Settings  
Troubleshooting  
Key pad/DTMF  
DTMF - Dual-tone multi-frequency (DTMF) signaling is used for telephone  
signaling over the line in the voice-frequency band. This means that there will  
be sent a tone representing the number clicked on the key pad.  
There are several situations where you will need the tone based key pad.  
E.g:  
If you are to log in to a password protected conference, you will be prompted  
for a number. Bring up the key pad and click the required number.  
If you are to set up a new conference using equipment that requires DTMF.  
It can also be used if you are calling a voice system where you need to use  
dial tones to navigate menus (e.g. “To speak to an operator, please press 1” ).  
To bring up the key pad and enter a number:  
1
1
Click the Ke y P a d  
Enter the required number  
Note: The key pad cannot be used to enter numbers in the Search field or in  
any way write a number.  
Using Movi outside your office  
It is possible to use Movi outside your office and intranet.  
If you are not able to use your Movi on the public internet, contact your  
network administrator.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
7
 
 
What’s in this guide?  
Getting started  
Makingcalls  
Adjusting Movi  
Settings  
Troubleshooting  
Next steps  
1
Selfview  
By clicking Se l f v i e w , you toggle selfview mode. This is possible to do before  
you start a call and during a call.  
2
Turn camera on/off  
Switch your camera on and off by clicking the ca M e r a button.  
If you switch the camera off during a call, Movi will continue to show the  
last video frame as a still image or a static poster on the far end system. It is  
possible to restart the camera by clicking the ca M e r a button again.  
If you switch the camera off before you make a call, there will be no video on  
the far end system. It is then possible to turn the camera back on during the  
call.  
1
2
3
4
3
Turn microphone on/off  
Mute your microphone by clicking the Mic r o P h o n e button. To switch the  
microphone back on, click the button again.  
If you turn the microphone off before making a call, it is possible to click the  
icon and turn it on again during the call.  
4
Adjust speaker volume  
To adjust volume, mouse over the lo u d S P e a K e r icon. The volume indicator  
can be dragged down to decrease volume or up to increase volume.  
Your loudspeaker can be turned off by either dragging the indicator all the  
way down the slide or toggle your loudspeaker on and off by clicking the  
icon.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
8
 
 
What’s in this guide?  
Getting started  
Makingcalls  
Adjusting Movi  
Settings  
Troubleshooting  
Add a contact to My contacts list  
The My contacts list is a list of persons you want quick access to. There are  
two alternatives to add contacts to the list:  
1
1
Add a contact with the Search field  
1. Type the name of the person you are going to call in the Search field.  
2. Move your cursor down to the person’s name and click once on the name.  
The link ad d t o M y c o n t a c t S appears.  
3. Click ad d t o M y c o n t a c t S .  
4. Click Sa v e , optionally edit the name of your contact.  
2
Add a contact with the My contacts button  
1. Click My c o n t a c t S  
2. Click ad d n e w c o n t a c t  
3. Enter name of contact  
4. Click Sa v e , optionally edit the name of your contact.  
3
Add a contact with the Recent calls button  
The Recent calls list can contain up to 128 of your recent calls. It builds up  
automatically.  
Use it to re dial. It works in the same manner as dialing with the Search field  
and the My contacts list.  
It is possible to add persons from the Recent calls list to the My contacts list.  
2
3
1. Click re c e n t c a l l S  
2. Move your cursor down to the person’s name and click once on the name.  
The link ad d t o M y c o n t a c t S appears.  
3. Click ad d t o M y c o n t a c t S .  
4. Click Sa v e , optionally edit the name of your contact.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
9
 
 
What’s in this guide?  
Getting started  
Makingcalls  
Adjusting Movi  
Settings  
Troubleshooting  
View call quality  
1
Quality indicator  
Reduced video or sound quality during a call can have several reasons and  
can be solved differently according to symptoms. To improve your network-  
and video settings see section Adjust your network settings or section  
Troubleshooter.  
The indicator in the lower right corner gives you an indication on the current  
network performance. The indicator has three levels:  
Normal  
Reduced  
Critical  
2
The indicator is gray when you are not in a call.  
1
2
Call status information  
Call status information is a window containing technical information.  
E.g. information about  
call rate,  
video; protocol, resolution,  
audio; protocol, channel rate, packet loss.  
The button is only available when in a call. It is for example used to supply  
your administrator with information. There are no adjustable fields.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
10  
 
 
What’s in this guide?  
Getting started  
Making calls  
AdjustMovi
Settings  
Troubleshooting  
Adjust your Movi application window  
You have the possibility to alter the view of your Movi and your video window.  
E.g. while not in a call, your Movi can be minimized to your SysTray or toolbar.  
In other situations Movi can be expanded to the whole screen.  
4
Close Movi  
By clicking cl o S e , Movi closes your application window. You will still be able  
to receive calls.  
Movi is now stored in your computer’s SysTray in the lower right corner on  
your computer screen. Your current presence status will be displayed on  
top of the Movi icon in your SysTray. To restore the Movi window, double  
click the Movi icon.  
1
Minimize Movi  
By clicking Min iM iz e , Movi minimizes to the Toolbar.  
Note: To exit Movi, see Presence in Movi  
2
Maximize Movi  
By clicking Ma x iM iz e , Movi will maximize the application window and fill your  
whole screen. All functionality is still available.  
1
4
2
2
Restore Movi  
2
Maximize  
Restore  
By clicking re S t o r e , Movi will restore the application window to the last size  
you set for the window before you maximized.  
3
Fullscreen  
In Fullscreen mode the video fills the entire screen. Menus, toolbars and  
window controls are hidden.  
Note: Fullscreen mode is available only when Movi is in a call or when  
Selfview is turned on.  
Enter Fullscreen mode by clicking fu l l S c r e e n or by double clicking the video.  
3
To exit Fullscreen mode and return to normal view, double click the fullscreen  
video or press eS c .  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
11  
 
 
What’s in this guide?  
Getting started  
Making calls  
AdjustMovi
Settings  
Troubleshooting  
1
Presence in Movi  
Presence indicates a users online status. Your chosen presence is reflected  
in other peoples’ contact lists and in the Search field you will see other users  
status when entering a name. The status is a combination of an icon and  
text. You can also see your contacts’ current presence in your My contacts  
list.  
You can manually set you presence by clicking the Pr e S e n c e button.  
The alternatives are: Online, Away, Busy, Appear offline.  
Your presence will automatically be set to:  
Busy in a call when you are in a call.  
Note: If your presence is set manually, it will not change when you are in a  
call.  
1
Explanation of icon and text displayed:  
Green icon, text Online – online Movi user.  
Green icon, text Registered – Connected Endpoint.  
Green ring icon, text Away – Manually set by user.  
Red icon, text Busy in call – Automatically set by Movi when user is in call.  
Red icon, text Busy – Manually set by user. The user will not hear ring  
tone, but can still accept calls by the pop up window.  
Grey icon, text Offline – User automatically set to offline when signed out,  
Movi exited or manually set to appear offline. When you are manually set  
to appear offline, you will not hear ring tone, but can still accept calls by  
the pop up window.  
Grey icon, text No status – No presence information is available for this  
user. User may be offline or online.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
12  
 
 
What’s in this guide?  
Getting started  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
Settings for Movi  
Adjust your network settings  
Your Movi comes with network settings pre-set. If you are experiencing  
jagged video or sound or if you are using your Movi on a different location  
than you normally do, you might need to adjust your settings.  
By setting bandwidth and video resolution to fit your network and computer  
capabilities Movi will present to you a more coherent video and sound.  
1
1. Click Se t t in g S  
1
2
2. Select ne t w o r K  
3. Adjust Max incoming bandwidth  
4. Click oK  
Adjust video resolution  
Your Movi comes with video settings pre-set. If your other applications are  
running too slow or your CPU usage is close to 100%, you can adjust your  
video resolution.  
1
4
3
2
1. Click Se t t in g S  
3
2. Select vid e o  
3. Adjust video resolution  
4. Click oK  
Automatic start up of Movi  
To have Movi start up when you log on to your PC, follow these steps:  
1
1. Click Se t t in g S  
4
2. Select aP P l ic a t io n  
3. Check the Start TANDBERG Movi at Windows logon check box  
4. Click oK  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
13  
 
 
What’s in this guide?  
Getting started  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
Change ringtone  
To change ringtone, follow these steps:  
1
1. Click Se t t in g S  
2
2. Select no t i f i c a t i o n S  
3. Use the drop down menu and select one of the alternatives  
4. Try the tone by clicking the Pl a y button  
5. Click oK  
Restrict incoming calls  
1
You have the possibility to decide when and how Movi shall notify you when  
calls come through. The alternatives to check are:  
Do not play notification when I am busy.  
If you have set your presence to Busy, Movi will not play the ring tone.  
Do not play notification when I am in a call.  
If you are in a call already, Movi will not play the ring tone.  
Enable tray icon notifications.  
When you have minimized your Movi to the SysTray (see Adjust your Movi  
application window), Movi will still display an incoming call pop up box and  
play the ringtone.  
To set the Notifications, follow these steps:  
2
1
1. Click Se t t in g S  
2
2. Select no t i f i c a t i o n S  
3. Check your preferred settings  
4. Click oK  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
14  
 
 
What’s in this guide?  
Getting started  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
network performance. The indicator has three levels:  
Troubleshoot  
To troubleshoot in Movi you need Call status  
symptoms. This information is available with the Call status button. Some of  
the information tells you what is actually wrong and some of the information  
indicates where you can adjust to have better quality when using Movi.  
Normal  
1
in addition to your  
Reduced  
Critical  
The indicator is gray when you are not in a call.  
The quality of sound and video is also influenced by factors that you cannot  
adjust through Movi; your camera quality, your network capabilities, your pc’s  
capacity. The quality of what you receive is also influenced by the capacity of  
the other party of the conversation.  
It is possible for you to adjust your network- and video settings to improve  
your video and sound.  
Call status information  
Call rate - Indicates the maximum bandwidth that Movi is allowed to use for  
sending or receiving data. This is configurable through the Settings.  
Resolution – The higher, the better. Camera capabilities and call rate are two  
main factors in deciding what will be the resolution. Remember that to high  
resolution compared to your network capabilities might also reduce quality.  
Channel rate – The amount of video/audio information being sent/received.  
The actual bandwidth will be a little higher due to control information that  
is sent as well. If the video channel rate plus the audio channel rate is  
dramatically smaller than the call rate, it’s due to either experiencing packet  
loss, or the camera providing information at less than 30fps.  
1
Packet/Current loss – How much information never reached its destination.  
Packet loss is a result of bad network connection and cause bad audio/video  
quality.  
Jitter – The average time difference between information packets received by  
the far end.  
Jagged video  
If you are experiencing jagged video or sound during a call, you could have  
packet loss due to reduced network performance or wrong bandwidth.  
The indicator in the lower right corner gives you an indication on the current  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
15  
 
 
What’s in this guide?  
Getting started  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
Adjust network  
Your Movi comes with network settings pre-set. If you are experiencing  
jagged video or sound or if you are using your Movi on a different location  
than you normally do, you might need to adjust your settings.  
By reducing Movi’s demands for network resources, Movi will be able to  
present to you a more coherent video and sound.  
1
1. Click Se t t in g S  
2
2. Select ne t w o r K  
3. Reduce Max incoming bandwidth  
1
Adjust video resolution  
Your Movi comes with video settings pre-set. If your other applications are  
running too slow or your CPU usage is close to 100%, you can adjust your  
video resolution.  
1
1. Click Se t t in g S  
3
2. Select vid e o  
3. Reduce video resolution  
Slow PC  
3
2
If your PC seems to be slow during videoconferencing, you might have an  
overloaded CPU. Video and sound are very demanding in regards to CPU  
time. By reducing Movi’s network resources, Movi will be able to run without  
slowing your PC down. See Adjust network and Adjust video resolution.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
16  
 
 
What’s in this guide?  
Getting started  
Making calls  
Adjusting Movi  
Settings  
Troubleshooting  
U.S. HEADQUARTERS  
TANDBERG  
EUROPEAN HEADQUARTERS  
TANDBERG  
1212 Avenue of the Americas  
24th Floor  
Philip Pedersens vei 20  
1366 Lysaker  
New York, NY 10036  
Norway  
Telephone: +1 212 692 6500  
Fax: +1 212 692 6501  
Video: +1 212 692 6535  
Telephone: +47 67 125 125  
Fax: +47 67 125 234  
Video: +47 67 126 126  
Copyright © TANDBERG 2009. All rights reserved.  
INTELLECTUAL PROPERTY RIGHTS  
The TANDBERG Movi covered by this User Guide is protected under  
copyright, patent, and other intellectual property rights of various  
jurisdictions. Any applicable software licenses and any limited warranty  
are located in the License Information displayed when installing Movi.  
D14409.01 USER GUIDE TANDBERG MOVI—FEBRUARY 2009  
17  
 

Tektronix Work Light VITS100 User Manual
Toastmaster Toaster TMT2 User Manual
Toro Power Hammer TR70XT User Manual
Tote Vision Computer Monitor LCD 1048HDM User Manual
TP Link Wireless Office Headset TL WA7510N User Manual
TRENDnet Router TEW 659BRV User Manual
Uniden Cordless Telephone DCT736 User Manual
ViewSonic Flat Panel Television VS11769 2M User Manual
VTech Cordless Telephone VT 2931 User Manual
Weber Gas Grill 294001 User Manual