Technicolor Thomson Portable CD Player TM9237 User Manual

Safety Information  
CAUTION!  
EN  
CAUTION – INVISIBLE LASER RADIATION  
WHEN OPEN AND INTERLOCKS FAILED OR  
DEFEATED. AVOID EXPOSURE TO BEAM.  
Invisible laser radiation when open. Avoid exposure  
to beam. Class 1 laser product. This system must be  
opened only by qualified technicians to prevent  
accidents caused by the laser beam.  
RAYONNEMENT LASER INVISIBLE  
ATTENTION –  
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE  
LA SECURITE EST NEUTRALISEE.  
EXPOSITION DANGEREUSE AU FAISCEAU.  
LASER  
λ
= 780 nm, P max = 5 mW  
Rating Information: At bottom of the unit  
ADVARSEL!  
this unit comply with the existing requirements  
USYNLIG LASERSTRĀLING, NĀR ENHEDEN ER ĀBEN  
OG SIKKERHEDSAFBRYDERNE ER UDE AF  
FUNKTION ELLER OMGĀET. UNDGĀ EKSPONERING  
FOR STRĀLEN.  
VORSICHT!  
UNSICHTBARE LASERSTRAHLUNG BEI GEÖFFNETER  
ABDECKUNG, FALLS SICHERHEITS-VERRIEGELUNG NICHT  
EINGERASTET IST ODER WENN SIE BEEINTRÄCHTIG  
IST. SETZEN SIE SICH NICHT DEM LASERSTRAHL AUS!  
In accordance with the rating plate  
of the unit, this unit complies with  
current standards concerning  
electrical safety and electromagnetlc  
compatibillity.  
Please respect the environment.  
Before throwing any batteries away,  
consult your distributor who may be  
able to take them back for specific  
recycling.  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
LASERAPPARAT AV KLASS 1  
DE  
AREIL  
A
LASER  
CLASSE  
1
LUOKAN 1 LASERLAITE  
LASERPRODUKT AF KLASSE 1  
VARNING!  
OSYNLIG LASERSTRĀLNING NÄR DENNA  
DEL ÄR ÖPPNAD OCH SPÄRRARNA ÄR  
URKOPPLADE. TITTA EJ IN I STRĀLEN.  
VARO  
AVATTAESSA JA OHITETTAESSA SUOJALUKITUS  
OLET ALTTIINA NÄKYMÄTTÖMÄLLE  
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
T H E L I G H T N I N G  
CAUTION: TO REDUCE THE THE EXCLAMATION  
RISK OF ELECTRIC SHOCK, POINT WITHIN THE  
FLASH AND ARROW-  
HEAD WITHIN THE  
DO NOT REMOVE COVER T R I A N G L E I S  
A
TRIANGLE IS  
WA R N I N G  
A
WARNING  
SIGN  
ALERTING YOU OF  
T A T  
( O R B A C K ) . N O U S E R -  
SERVICEABLE PARTS IN-  
SIDE. REFER SERVICING  
TO Q U A L I F I E D S E RV I C E  
PERSONNEL.  
S I G N  
ALERTING YOU OF  
" D A N G E R O U S  
VOLTAGE" INSIDE  
THE PRODUCT.  
I
M
P
O
R
N
I N S T R U C T I O N S  
A C C O M PA N Y I N G  
T H E P R O D U C T.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
WARNING:TO PREVENT FIRE OR ELECTRICAL  
DO NOT EXPOSETHIS PRODUCT  
SHOCK HAZARD,  
TO RAIN OR MOISTURE.  
TM9237 EN  
1
6/24/05, 5:36 PM  
 
CD player  
Display  
Program mode  
Playing disc  
Random Playback  
EN  
EN  
SELECT  
TAPE  
RADIO  
CD  
PROG.  
This unit is compatible with audio CD-R  
discs.  
During playback, press  
randomly.  
to play tracks  
Track number (shows during  
disc playback)  
Mix play  
1. Selects CD from the SELECT switch.  
In stop mode, press  
to activate random  
function and press PLAY/PAUSE  
begin random playback.  
to  
Repeat mode (REPEAT 1 - repeat  
current track, REPEAT ALL - repeat  
entire disc)  
2. Press OPEN  
to open disc compartment  
REPEAT 1  
ALL  
door.  
The  
icon appears on display when random  
3. Insert a disc with label face up.  
playback is activated.  
4. Push CLOSE to close disc compartment door.  
Total number of track on disc can be read  
from display.  
Press  
again for de-selection.  
Radio  
5. Press PLAY/PAUSE to begin CD playback.  
Programming  
6. Press  
or  
to skip to previous  
4. Adjust MIN. VOLUME MAX. to your desired  
Tuning to a station  
1. Press PROG. to enter program mode. The  
program location will flash once on the  
display. Then the track number stored in the  
memory location will keep flashing.  
SELECT  
or next track respectively.  
listening level.  
TAPE  
RADIO  
CD  
1. Select RADIO from the SELECT  
7. Press and hold  
or  
to  
switch.  
search quickly current track backward or  
forward respectively.  
2. Slide BAND to select between MW/FM band.  
Tip:  
If the memory location is empty, 00 will be  
flashing.  
8. Adjust MIN. VOLUME MAX. to your desired  
3. Rotate < TUNING > to select radio station.  
Extend or reposition the antenna for  
better FM reception. Move the unit  
for better MW receptions  
listening level.  
2. Press  
or  
to select the track  
9. Press PLAY/PAUSE or STOP to pause or stop  
disc playback respectively. To resume  
playback, press PLAY/PAUSE again.  
you want to program.  
3. Press PROG. again to confirm your selection  
and access the next program location.  
4. Repeat steps 2 to 3 to program to a  
maximum of 20 tracks.  
Repeating  
Press REPEAT once to repeat current track and  
5. Press PLAY/PAUSE  
in program mode to  
start program playback (PROG. indicator  
REPEAT 1 icon shows on display.  
remains lit on the display).  
Press REPEAT twice to repeat entire disc and  
REPEAT ALL icon shows on display.  
Press STOP  
to return to normal playback  
mode.  
Press REPEAT a third time to turn off repeat  
mode.  
Tip:  
If you are in normal playback mode  
but want to play the saved program.  
Press PROG. and then PLAY.  
Note:  
When random playback is  
activated, only Repeat All can be  
selected.  
Clearing program list  
Your program will be erased once you open the  
disc compartment door or change to another  
source mode (e.g. radio, tape).  
3
4
TM9237 EN  
4-5  
6/24/05, 5:36 PM  
 
Tape player  
Troubleshooting tips  
4. Tune to the station to be recorded.  
Problem  
Solution  
Playing a tape  
EN  
EN  
SELECT  
5. Press REC and PLAY together to begin  
TAPE  
RADIO  
CD  
1. Select TAPE from the SELECT switch.  
System doesn’t turn on  
No sound  
• Unplug the unit for a moment, and then plug it back in.  
• Check the outlet by plugging in another device  
recording.  
2. Press STOP/EJ. to open the tape  
6. Press PAUSE or STOP to pause or stop  
deck door.  
• Adjust volume setting.  
recording respectively.  
3. Insert a tape into the door and push the  
door closed.  
• Make sure you’ve selected the correct function  
Poor radio reception  
• Adjust the antenna for better reception  
• Try turning off electrical appliances near the unit, such as hair dryers,  
vacuum cleaners, or fluorescent lights  
From CD  
4. Press REW or F.FWD. to wind the tape to the  
desired starting position. Press STOP/EJ. to  
stop winding.  
1. Insert a tape into the deck.  
2. Select CD from the SELECT switch.  
3. Insert the disc to be recorded.  
4. Select the track or program to be recorded.  
5. Press PLAY to start playback, PAUSE to  
pause playback (release the button to  
resume playback) and STOP/EJ. to stop  
playback.  
CD doesn’t play  
CD sound skips  
• Make sure you’ve put a CD in the tray  
• Make sure the CD’s label is facing up  
• Try another CD  
• Make sure that Pause mode is not activated  
• Make sure CD function is selected  
5. Press REC and PLAY together to begin  
recording.  
6. Play the track or program to be recorded.  
• Clean the CD (as explained in “Maintenance”)  
• Check CD for warping, scratches, or other damage  
• Check for vibration or shock that may affect the unit; move the set if necessary.  
Recording to tape  
From radio  
1. Insert a tape into the deck.  
7. Press PAUSE or STOP to pause or stop  
recording respectively.  
2. Select RADIO from the SELECT selector.  
3. Slide BAND to access the desired radio band.  
ESD Remarks:  
In case of malfunction due to electrostatic discharge, just reset the unit (reconnecting the power supply  
may be required) to resume normal operation.  
Tip:  
For better recording quality, use  
normal bias tape (Type I) only.  
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as a  
guarantee. In order to provide you with the highest quality product, we may make changes or modifications without  
prior notice. The English version serves as the final reference on all product and operational details should any  
discrepancies arise in other languages.  
5
6
TM9237 EN  
6-7  
6/24/05, 5:36 PM  
 
Maintenance  
More information  
Cleaning the exterior  
- if all batteries are not replaced at the same  
time,  
Notes on CD-R/ CD-RW Disc  
Safety Precautions  
EN  
EN  
Disconnect the system from AC power  
before cleaning the exterior of the unit with  
a soft dust cloth  
CD-R discs that are recorded using personal  
computers or other CD-R recorders may not  
be played on this unit due to the difference  
in recording platforms.  
Never open the cabinet under any  
circumstances. Any repairs or internal  
adjustments should be made only by a trained  
technician.  
- if disposed of in fire, or  
- if an attempt is made to charge a battery  
not intended to be recharged  
Clean the exterior with a soft clean cloth or  
slightly moistened chamois leather. DO NOT  
use solvents as it may cause damage to the  
unit.  
Never operate this product with the cabinet  
removed.  
Do not affix any type of labels to either side  
(recordable or labeled side) of a CD-R disc as  
this may result in the disc malfunctioning.  
Don’t Infringe  
Do not use your System immediately after  
transporting it from a cold place to a warm  
place, as condensation may cause the system  
to malfunction.  
This product should only be used for the  
purposes for which it is sold, that is,  
entertainment, violating no copyright law. Any  
attempts to use this product for which it is not  
intended is unlawful and therefore not  
condoned by Thomson.  
To avoid damages to the CD-R disc, do not  
open the disc compartment door while the  
disc is being read. This may take more then  
30 seconds.  
Handling CDs  
Keep your unit away from humid areas and  
abnormally hot places.  
Do not touch the signal surfaces. Hold CDs  
by the edges, or by one edge and the hole.  
Do not touch the player with wet hands. If  
any liquid enters the player cabinet, take the  
player to a trained technician for inspection.  
Do not load an unrecorded CD-R disc into  
the unit.  
Do not affix labels or adhesive tapes to the  
label surfaces. Do not scratch or damage the  
label.  
Your THOMSON product is  
designed and manufactured  
with high quality materials and  
components which can be  
recycled and reused.  
This compact disc player uses a laser to read  
the music on the disc. The laser mechanism  
corresponds to the cartridge and stylus of a  
record player. Although this product  
incorporates a laser pick-up lens, it is  
completely safe when operated according to  
directions.  
CDs rotate at high speeds inside the player.  
Do not use damaged (cracked or warped)  
CDs  
Cassettes  
• To protect your recordings from accidental  
erasure on one or both sides of your  
This symbol means that electrical  
and electronic equipment, at their end-of-life,  
should be disposed of separately from your  
household waste.  
Please, dispose of this equipment at your local  
community waste collection/recycling centre.  
In the European Union there are separate  
collection systems for  
cassette, snap out the tab at the top of the  
cassette. If you decide later to record on the  
tape, seal the hole with a piece of adhesive  
tape. (Refer to diagram on the right)  
Make sure CDs are stored in their original  
case after use. Keep them away from damp,  
humid or abnormally heated places.  
Discs rotate at high speed inside the player.  
Do not use damaged, warped, or cracked  
discs.  
Do not touch the pick-up lens which is located  
inside the disc compartment. To keep dust  
from collecting on the pick-up lens, do not  
leave the compartment door open for an  
extended period of time. If the lens becomes  
dirty, clean it with a soft brush, or use an air  
blower brush designed for camera lenses.  
Cleaning CDs  
A
A
A
A
Dirty CDs can cause poor sound quality.  
Always keep CDs clean by wiping them  
gently with a soft cloth from the inner edge  
toward the outer perimeter.  
6
0
used electrical and electronic product.  
Please, help us to conserve the environment we  
live in!  
Quit Slacking - A little bit of  
If a CD becomes dirty, wet a soft cloth in  
water, wring it out well, wipe the dirt away  
gently, and then remove any water drops  
with a dry cloth.  
slack in your tapes can cause  
scratches on the tape, or worse  
yet, the tape could break. If you  
notice some slack in the tape,  
use a pencil to tighten it up before you  
insert it.  
A
The apparatus shall not be exposed to  
dripping and splashing.  
Technical Specification  
Power supply: 230V~50Hz  
Dimensions (H x W x D mm):  
Unit size - TM9237: 180 x 305 x275  
Tape deck: Response curve: 125Hz-8kHz (-5dB)  
CD player: Response curve (+/- 2dB): 60Hz to  
20 kHz  
Do not use record cleaning sprays or  
antistatic agents on CDs. Also, never clean  
CDs with benzene, thinner, or other volatile  
solvents which may cause damage to disc  
surface.  
Important Battery  
Information  
Rating Plate: Look for it at the bottom of the  
set.  
Remove the batteries to avoid leakage if you  
do not use your system for more than one  
month.  
Discard leaky batteries immediately as leaking  
batteries may cause skin burns or other  
personal injuries. Dispose of batteries in the  
proper manner, according to provincial and  
local regulations.  
CD Lens Care  
When your CD lens gets dirty it can also  
cause the system to output poor sound  
quality. To clean the lens you will need to  
purchase a CD lens cleaner which can  
maintain the output sound quality of your  
system. For instructions on cleaning the CD  
lens, refer to the ones accompanying the  
lens cleaner.  
Any battery may leak electrolyte under the  
following circumstances:  
- if mixed with a different battery type,  
- if inserted incorrectly,  
7
8
TM9237 EN  
8-9  
6/24/05, 5:36 PM  
 

Tatung Indoor Furnishings TRK 191 User Manual
Telex Stereo System NEO 10 User Manual
Toshiba DVD Player SD P2900 User Manual
Toshiba Flat Panel Television 20RTH User Manual
Transition Networks Network Card N GXX XX 01 User Manual
Turtle Beach Headphones X41 User Manual
Uniden Cordless Telephone 900 MHz User Manual
United States Stove Stove VF30I User Manual
Viking Cooktop F21208 User Manual
Vulcan Hart Outdoor Cart F037411 User Manual