Tektronix Printer 4681FXI User Manual

Instruction Sheet  
Phaserª 220e  
4681FXI Ð Upgrading a Phaser 220e to  
a Phaser 220i  
This instruction sheet provides the details for replacing a Phaser 220e's image processor board and I/O  
board with a 220i image processor board and I/O board. After installing the upgrade you must return  
the 220e image processor board and its I/O board to Tektronix.  
Tools required  
#1 POSIDRIV¨ screwdriver  
Antimstatic mat 006-7056-00  
Static precautions  
Leave the printer plugged into its power outlet. This preserves a  
ground path for static discharges.  
Touch the printer's bare metal frame often to discharge static  
electricity from your body.  
Handle the circuit board(s) by their edges only.  
Do not lay the board(s) on a metal surface.  
Make the least possible movements to avoid generating static  
electricity.  
Avoid wearing nylon or polyester clothing; they generate static  
electricity.  
Copyright © 1994 by Tektronix, Inc. All rights reserved.  
063-1442-AB  
 
4681FXI Ð Upgrading a Phaser 220e to a Phaser 220i  
5. Remove the card cage top (3 screws).  
6. Flip over the hinged card cage top.  
7. Lift out the 220e image processor board. Save the board to return to  
Tektronix.  
3
4
6
8699-38  
3
 
4681FXI Ð Upgrading a Phaser 220e to a Phaser 220i  
8. If installed, remove the RAM SIMM installed in J6 of the 220e image  
processor board.  
9. If you removed a RAM SIMM from the 220e image processor board in  
Step 8, insert it in the 220i image processor board's connector J6 (or in  
J7 if J6 is already Þlled) (a), and tilt the module upright until it locks in  
place (b).  
When properly inserted, a tab on each end of the connector slips into a  
hole on each end of the RAM SIMM. Also, a pawl on each end of the  
connector latches around each end of the RAM SIMM to lock it in  
place.  
10. Repeat Step 9 to install an additional memory module in J7 if a second  
SIMM is available.  
RAM  
SIMMs  
a
b
a
b
J6  
J7  
8699-65  
11. Install the 220i image processor board in the card cage. Close and  
secure the card cage top.  
12. Install the Phaser 220i's I/O board. Be sure to plug in its two I/O  
cables to the image processor board.  
13. After you install this upgrade kit, be sure to afÞx the F-kit upgrade  
serial number sticker to the printer. Attach the sticker to the right of  
the existing printer serial number.  
14. Close and secure the card cage top. Reinstall the rear cabinet panels.  
15. Reconnect the host interface cables. Turn on the printer and make a  
print.  
4
 
4681FXI Ð Upgrading a Phaser 220e to a Phaser 220i  
Return the 220e image processor and I/O boards to Tektronix  
1. Pack the 220e image processor board in the antistatic bag that the 220i  
image processor board was shipped in.  
2. Place the packed image processor board inside the shipping box.  
1. Pack the old I/O board in the antistatic bag the that new I/O board  
was shipped in.  
2. Place the packed I/O board inside the shipping box.  
3. Mail the package to Tektronix:  
Mailing in the USA:  
Write the printer's serial number on the U.S.A shipping return label that  
was included with the upgrade kit.  
Attach the self-adhesive shipping label to the box.  
Secure the box closed with heavy-duty shipping tape and mail to the  
pre-addressed location. Postage is prepaid.  
Mailing outside the USA:  
Write the printer's serial number on the international shipping return  
label that was included with the upgrade kit.  
Attached the self-adhesive shipping label to the box.  
Write the printer's serial number on the international shipping return  
label.  
Secure the box closed with heavy-duty shipping tape and ship the box  
to Tektronix using your respective country's shipping method.  
5
 

Telex Headphones AIR3100 User Manual
Timex Watch 791 095003 User Manual
TOA Electronics Portable Speaker F 1000B User Manual
Toshiba MP3 Player SD V291 User Manual
Trane Heat Pump 2TWB0 UM 2 User Manual
Tripp Lite Switch WEXT5 B060 032 User Manual
Vector Work Light VEC189 User Manual
Vita Mix Blender 120 VAC Models User Manual
Vivotek Webcam VS8100 User Manual
Weber Gas Grill 43146 User Manual