Viking Camera Accessories SSFDC A2 User Manual

VIKING MEMORY  
INSTALLATION GUIDE  
SMARTMEDIA™ MEMORY CARD/SSFDC  
& ADAPTER  
2. Insert the adapter with the Viking logo on its label facing up into one of your comput-  
er’s PC Card slot. Then firmly press the card into the slot to ensure it is completely seat-  
ed. The adapter can only be  
seated into this slot one way do  
the the keying on the adapter.  
Note: The SmartMedia memory  
can be inserted or removed into  
the adapter when the computer  
is either on or off.  
Manual No. 1005223  
Release 04/99, Rev. D  
®
3. In most systems the  
SmartMedia card is seen like a  
hard drive.  
S P E E D  
P O W E R  
P E R F O R M A N C E  
SmartMedia™ Memory Card/SSFDC & Adapter*  
This guide is will cover the installation and care of Viking’s SmartMedia Memory  
Card/Solid State Floppy Disk Card (SSFDC) and adapter.  
In Windows 95 and Windows NT 4.0 based systems, go to the iconMy Computer” on your  
systems desktop and double-click on it. You should see the SmartMedia card listed.  
Description  
Viking P/N  
For Apples with Mac OS 7.53 or later (with Macintosh PC Exchange loaded), the  
SmartMedia card will appear on the desktop.  
SmartMedia Adapter - Dual Voltage  
SSFDC/A2, RSSFDC/A2  
SSFDC3/2, RSSFDC3/2  
SSFDC3/4, RSSFDC3/4  
SSFDC3/8, RSSFDC3/8  
SSFDC3/16, RSSFDC3/16  
SSFDC/2, RSSFDC/2  
2MB SmartMedia Memory Card - 3.3 Volt  
4MB SmartMedia Memory Card - 3.3 Volt  
8MB SmartMedia Memory Card - 3.3 Volt  
16MB SmartMedia Memory Card - 3.3 Volt  
2MB SmartMedia Memory Card - 5 Volt  
4MB SmartMedia Memory Card - 5 Volt  
Simply double-click on the SmartMedia card to open it. Information can them be placed  
or retrieved from it like any other storage device.  
ATTENTION DIAMOND RIO USERS:  
Once a SmartMedia™ memory card has been used in the Diamond Rio PMP300, it can  
only be used within this device.  
SSFDC/4, RSSFDC/4  
This compatibility issue is due to the proprietary formatting of SmartMedia™ memory  
cards by the Diamond Rio PMP300.  
*Adapter sold separately.  
TROUBLESHOOTING:  
1. If the SmartMedia card and adapter are not seen by your computer.  
• Some systems may have all of their IRQ’s occupied by built-in devices. A built-in device  
may need to be disabled.  
WARRANTY & DISCLAIMERS:  
All Viking Components products have been thoroughly tested free of defects in material and work-  
manship. If any malfunction should occur while using one of our products in its recommended envi-  
ronment, Viking, at its option, will repair or replace the product at no charge, provided the product  
or any part thereof has not been abused, misused, neglected, replaced, repaired or modified. Viking  
shall make the final determination as to the existence and the cause of any defect. Viking will not  
repair or replace products designated as having a “Limited Lifetime” which fail solely because their  
estimated life has expired. No warranty is made with respect to customer products produced to  
original purchaser specifications except as specifically stated in writing by Viking.  
Caution:  
Electro Static Discharge (ESD) can damage electronic components. Before touching the mem-  
ory module, ensure that you are discharged of static electricity by touching a grounded metal  
object.  
BASIC HANDLING INSTRUCTIONS:  
All shipping costs shall be the responsibility of the purchaser.  
Except as provided herein, there are no express or implied warranties of merchantability or fitness  
for a particular purpose. Under no circumstances will Viking Components be liable in any way to the  
purchaser for any damages, including but not limited to lost revenue, lost wages, or any other inci-  
dental or consequential damages arising out of the use of or inability to use this product. Viking  
reserves the right to make modifications in both hardware and software without prior notifications.  
• Do not bend or flex the card or the adapter.  
• Do not drop the card or the adapter.  
• Do not touch the gold leads on the card.  
• Keep the card and adapter away from moisture.  
• Keep the card and adapter out of direct sun light.  
All Viking Components are 100% guaranteed compatible with the OEM machines for which they are  
designed. All OEM's names, trademarks and part numbers are used for identification purposes only,  
and in no way imply that any of our products are original equipment parts.  
INSTALLATION INSTRUCTIONS:  
Apple, Mac and Macintosh PC Exchange are registered trademarks of Apple Computer, Inc.  
Windows and Windows NT are registered trademarks of Microsoft Corporation.  
Diamond Rio is a registered trademark of Diamond Multimedia System, Inc.  
All other trademarks mentioned are property of their holders.  
1. Position the adapter so that the Viking logo on its label is facing up. Insert the  
SmartMedia memory card, with the gold leads on the card facing up, into the adapter.  
For easy removal of the card from the adapter, there will be a small portion of the card  
still visible when installed in the adapter. To remove the card from the adapter, firmly  
grasp the edge of the card protruding from the adapter and pull it out.  
Copyright 1999 Viking Components, Inc.  
 

Texas Instruments Barcode Reader TMS470R1x User Manual
Thermo Products Furnace igh2 75 User Manual
Toastmaster Toaster T2055BC T2055BCCAN User Manual
Toshiba CRT Television 27DF46 User Manual
Toshiba Speaker System SD K530SU User Manual
Ultra Products Network Card ULT31434 User Manual
Ultra Products Power Supply ULT33165 User Manual
VDO Dayton MP3 Player MS 4150 RS MP3 User Manual
ViewSonic Flat Panel Television VS11531 User Manual
WatchGuard Technologies Cell Phone V100 User Manual