Viking Freezer DDFB User Manual

REFRIGERATION  
Built-In 30”W. All Freezer  
Standard Features & Accessories  
All models include  
• Capacity—15.9 cu. ft. (450.0 L)  
• Full-extension precision ball-bearing  
glides on all baskets and drawers  
• Adjustable door stops standard—90°,  
110°, or 120° swing  
o 84”H./24”D.  
• ProChill™ Temperature Management  
System  
• Three adjustable aluminum door bins  
with tempered glass front  
• Adaptive defrost  
• All-metal freezer interior  
Top-mounted and front-venting sealed  
refrigeration system  
• Dual magnet and spring-assisted door  
closer mechanism  
• Robust, heavy-duty door hinges  
• Power interruption switch to turn off  
all power  
• Automatic energy-saving exterior  
moisture control  
• Open door alarm sounds and glows to  
warn that door has been ajar for three  
minutes  
• Sabbath Mode  
• For installation of two units together,  
separate grille kit must be purchased  
• Must be ordered right or left hinge.  
(As you face unit, RIGHT has hinge on  
right side and handle on left side;  
LEFT has hinge on left side and  
handle on right side.)  
o
Variable-speed single compressor  
system includes the quietest, most  
technologically advanced  
compression available  
o
o
Electronic controls maintain the  
temperature selection within 1ºF  
Multi-channel airflow system  
removes odors and excess humidity  
• Six adjustable half-width wire shelves  
• One full-width metal shelf  
Two full-width slide-out wire baskets  
• Factory-installed automatic ice maker  
• One full-width ice storage drawer with  
two metal ice bins  
Model Options  
VCFB304  
Professional  
DDFB304  
Designer  
DFFB304  
Custom Front  
FINISH DETAILS FOR VCFB MODEL  
• Stainless Steel (SS), Black (BK), White  
(WH), Metallic Silver (MS), Graphite  
Gray (GG), Stone Gray (SG), Taupe  
(TP), Biscuit (BT), Cotton White (CW),  
Oyster Gray (OG), Golden Mist (GM),  
Lemonade (LE), Sage (SA), Mint Julep  
(MJ), Sea Glass (SE), Iridescent Blue  
(IB), Viking Blue (VB), Pumpkin (PM),  
Racing Red (RR), Apple Red (AR),  
Burgundy (BU), Plum (PL), Chocolate  
(CH), and Cobalt Blue (CB).  
FINISH DETAILS FOR DDFB MODEL  
• Stainless Steel (SS), Black (BK), White  
(WH), Metallic Silver (MS), Graphite  
Gray (GG), Stone Gray (SG), Taupe  
(TP), Biscuit (BT), Cotton White (CW),  
Oyster Gray (OG), Golden Mist (GM),  
Lemonade (LE), Sage (SA), Mint Julep  
(MJ), Sea Glass (SE), Iridescent Blue  
(IB), Viking Blue (VB), Pumpkin (PM),  
Racing Red (RR), Apple Red (AR),  
Burgundy (BU), Plum (PL), Chocolate  
(CH), and Cobalt Blue (CB).  
FINISH DETAILS FOR DFFB MODEL  
• Handle not included—opt for custom  
handle, or purchase a Viking  
Professional Series or Designer Series  
handle kit (see Installation Notes &  
Accessories).  
• See Custom Panels section for more  
information and additional  
specifications.  
• Finish codes designate door front.  
Stainless steel upper grille, side trim,  
and handle (with chrome-plated  
brackets); black lower kickplate.  
• Brass Trim Option (BR)—nameplate,  
handle/brackets, and side trim. Brass  
components have a durable protective  
coating for maintenance-free normal  
use.  
• Finish codes designate door front.  
Stainless steel upper grille, side trim,  
and handle, with black lower kickplate.  
• Brass Trim Option (BR)—handle. Brass  
components have a durable protective  
coating for maintenance-free normal  
use.  
ORDERING INSTRUCTIONS  
First specify model number, followed by hinge preference (“R” for right or “L” for left), and then color code (VCFB304RSS).  
If ordering optional brass trim, specify code at end (VCFB304RSSBR).  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
REFRIGERATION  
Built-In 30”W. All Freezer  
Dimensions & Specifications  
DOOR SWING  
• Adjustable door stops standard—90°, 110°, or 120° swing  
VCFB304  
Professional  
DDFB304  
Designer  
DFFB304  
Custom Front  
See Custom Panels section for  
more information and additional  
specifications.  
30”  
(76.2 cm)  
29”  
(73.7 cm)  
15-27/32”  
(40.2 cm)  
11-7/8”  
(30.2 cm)  
24-11/16”  
(62.7 cm)  
3-1/32”  
(7.7 cm)  
52-3/8”  
(133.0 cm)  
51”  
(129.5 cm)  
49-1/16”  
(124.6 cm)  
0
90.0  
0
110.0  
0
120.0  
2-1/2”  
(6.4 cm)  
PROFESSIONAL  
30”  
(76.2 cm)  
29”  
(73.7 cm)  
15-3/32”  
(38.3 cm)  
10-31/32”  
(27.9 cm)  
24”  
(61.0 cm)  
1-27/32”  
(4.7 cm)  
52-11/32
(132.9 cm
51”  
(129.5 cm)  
49-1/16”  
(124.6 cm)  
0
90.0  
0
110.0  
0
120.0  
2-1/16”  
(5.2 cm)  
DESIGNER  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
REFRIGERATION  
Built-In 30”W. All Freezer  
Dimensions & Specifications  
CLEARANCE DIMENSIONS—PROFESSIONAL  
TOP VIEW  
Wall  
1-13/16”  
(4.6 cm)  
space if 24” standard  
cabinet depth is used  
24”  
(61.0 cm)  
standard cabinet depth  
3/4”  
(1.9 cm)  
full end panel  
Countertop  
overhang  
Door  
2-1/2”  
(6.4 cm) offset  
TOP VIEW  
Wall  
1-13/16”  
24”  
(4.6 cm)  
(61.0 cm)  
standard  
cabinet  
depth  
space if 24” standard  
cabinet depth is used  
3/4”  
(1.9 cm)  
full end panel  
5/16”  
(0.8 cm)  
Door  
2-1/2”  
(6.4 cm) offset  
TOP VIEW  
Wall  
1-13/16”  
(4.6 cm)  
space if 24” standard  
cabinet depth is used  
24”  
(61.0 cm)  
standard cabinet depth  
3/4”  
(1.9 cm)  
full end panel  
Partial overlay  
cabinet door  
Door  
2-1/2”  
(6.4 cm) offset  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
REFRIGERATION  
Built-In 30”W. All Freezer  
Dimensions & Specifications  
CLEARANCE DIMENSIONS—DESIGNER  
TOP VIEW  
Wall  
1”  
(2.5 cm)  
if 25” (63.5 cm)  
cabinet depth is used  
25”  
(63.5 cm)  
countertop  
depth  
24”  
(61.0 cm)  
standard  
cabinet  
depth  
3/4”  
(1.9 cm)  
full end panel  
Door  
Flush  
TOP VIEW  
Wall  
1”  
(2.5 cm)  
if 25” (63.5 cm)  
cabinet depth is used  
25”  
3/4”  
(63.5 cm)  
(1.9 cm)  
full end panel  
Door  
Flush  
TOP VIEW  
Overlapping cabinet doors  
Wall  
1”  
(2.5 cm)  
if 25” (63.5 cm)  
cabinet depthis used  
24-3/4”  
(62.9 cm)  
3/4”  
(1.9 cm)  
full end panel  
24”  
(61.0 c  
standar  
cabinet  
depth  
m)  
d
Cabinet  
door  
Door  
Flush  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
REFRIGERATION  
Built-In 30”W. All Freezer  
Installation Requirements  
UTILITY  
REQUIREMENTS  
ACCESS REQUIREMENTS – Single Installation  
GAS  
Not applicable  
VCFB304  
Professional  
DDFB304  
Designer  
DFFB304  
Custom Front  
ELECTRICAL  
• Three-wire cord  
with grounded  
three-prong plug  
attached to  
See Custom Panels section for  
more information and additional  
specifications.  
24”*  
(61.0 cm)  
Anti-tip boar  
min.  
d
6”  
(15.2 cm)  
product  
• 115 VAC/60 Hz;  
15 amp  
dedicated circuit  
• Maximum amp  
usage—9.1  
9”  
(22.9 cm)  
9”  
(22.9 cm)  
• Estimated  
energy usage—  
601 kWh/year  
82-  
7/8”  
(210.5  
anti-  
cm) mi  
tip boar n.  
opening height  
ELECTRIC OUTLET LOCATION  
d &  
84-1/16”  
(213.5  
cm) max.  
ip boar  
anti-t  
opening h  
d &  
73-3/8”  
eight  
(186.4 cm)  
PLUMBING  
• Inlet waterline  
requirements—  
1/4copper  
tubing  
7-5/8”  
(19  
.4 cm)  
6-3/4”  
(17  
5/8”  
(1.  
.1 cm)  
5
cm)  
29-1/2”  
(74.9  
3”  
(7.6 cm)  
cm  
) min.  
to  
29-3/4”  
(75.6  
cm)  
fession  
Pr  
o
max.  
5/8  
3-5  
/8”  
m)  
Design  
• 20 psi min.;  
120 psi max.  
al  
(9.  
(1.  
30”  
cm)  
2 c  
(7  
6.2  
5 cm)  
e
r/Cus  
1”  
(2.5 cm  
)
t
om Fr  
ont  
10-3/4  
(27.3 cm)  
10-1/2”  
(26  
.7 cm)  
5/8”  
(1.5 cm)  
Optional floo  
wat  
er lin  
e e  
r
ntry  
*Custom front models fit flush in 25”-deep (63.5 cm)  
cabinet openings. They can be installed in standard  
24”-deep openings. The door faces and top grille  
will protrude 3/4” (1.9 cm) into the room.  
WATER LINE ENTRY AREA  
Shown for All Freezer only  
VCFB304  
DDFB304  
DFFB304  
Cutout width  
29-1/2” (74.9 cm) min. to  
30” (76.2 cm)  
30” (76.2 cm)  
29-3/4” (75.6 cm) max.  
Cutout height  
Cutout depth  
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.  
24” (61.0 cm) min.*  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
REFRIGERATION  
Built-In 30”W. All Freezer  
Installation Requirements  
ACCESS REQUIREMENTS – Dual Installation  
6”  
See anti-tip boar  
(15.2 cm)  
d installation  
24”*  
(61.0 cm)  
9”  
(22.9 cm)  
9”  
(22.9 c  
m)  
ELECTRIC OUTLET LOCATION  
82-7/8”  
(21  
0.5 cm)  
anti-t  
min.  
ip boar  
opening height  
d &  
73-3/8”  
(186.4 cm)  
84-1/16”  
(213.5 cm) max.  
7-5/8”  
anti-tip boar  
(19.4 cm)  
6-3/4”  
opening height  
5/8”  
(1.  
(
17.1  
d &  
cm)  
5 cm)  
3”  
(7.6 cm)  
5/8”  
3-5/8”  
(1.5 cm)  
(
9.2  
cm  
)
10-3/4”  
(27  
.3  
10-1  
26.7 c  
(
/
m)  
2
cm  
)
5/8”  
cm)  
1”  
(2.5  
(
1.  
cm)  
5
Op  
water  
tio  
nal  
line  
fl  
o
or  
entry  
59  
-
60” Des  
1/2”  
Pr  
(151.1  
ofession  
cm  
igner/  
(152  
.4 cm)  
C
)
om  
ust  
a
l
Fr  
ont  
30”/30” FREEZER/  
REFRIGERATOR COMBINATION  
WATER LINE ENTRY AREA  
Note: cutout opening shown with All Freezer model on left.  
Reverse water line entry if All Freezer model is on right  
6”  
(15.2 cm)  
See anti-tip boar  
d ins  
24”*  
(61.0 cm)  
tallation  
9”  
(22.9 cm)  
9”  
(22.9 c  
m)  
ELECTRIC OUTLET LOCATION  
82-7/8”  
(210.5 c  
m) min.  
anti-tip boar  
opening height  
d &  
73-3/8”  
(186.4  
cm)  
84-1/16”  
(213.5 cm) ma  
7-5/8”  
anti-tip boar  
(19.4  
6-3/4”  
x.  
cm)  
ope  
5
/8”  
(17.1 cm)  
d &  
ning height  
(1.5 cm  
3
)
(7.6 c  
m)  
5/8”  
m)  
3-  
5
/
8
cm  
(1.5 c  
(9.2  
)
10-3/4”  
(27  
.3 cm)  
10-1/  
.
(
26  
2
7
cm)  
5
/
5 cm)  
1”  
(2.5  
8”  
(
1.  
cm)  
O
pt  
iona  
er line ent  
w
a
t
l floor  
ry  
65  
-
66” Desi  
1/2”  
P
(166.4 c  
r
o
m
gne  
(167 r/C  
.6 cm)  
fession  
)
us  
to  
a
l
m
Fr  
ont  
30”/36” FREEZER/  
REFRIGERATOR COMBINATION  
WATER LINE ENTRY AREA  
Reverse water line entry if All Freezer model is on right  
Note: cutout opening shown with All Freezer model on left.  
*Custom front models fit flush in 25”-deep (63.5 cm) cabinet openings. They can be installed in standard 24”-deep openings. The  
door faces and top grille will protrude 3/4” (1.9 cm) into the room.  
VCFB304/VCRB304  
59-1/2” (151.1 cm)  
DDFB304/DDRB304  
60” (152.4 cm)  
DFFB304/DFRB304  
60” (152.4 cm)  
Cutout width  
Cutout height  
Cutout depth  
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.  
24” (61.0 cm) min.*  
VCFB304/VCRB364  
65-1/2” (166.4 cm)  
DDFB304/DDRB364  
66” (167.6 cm)  
DFFB304/DFRB364  
66” (167.6 cm)  
Cutout width  
Cutout height  
Cutout depth  
82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.  
24” (61.0 cm) min.*  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
REFRIGERATION  
Built-In 30”W. All Freezer  
Installation Notes & Accessories  
Side Panel Kits  
• Stainless Steel (SS)  
• Panels provide finished, freestanding look; unit must still be secured to the wall  
• Kit includes one panel and installation hardware  
Model  
PSSPL2  
PSSPR2  
DSSPL2  
DSSPR2  
Description  
Approx. ship wt. lbs. (kg)  
Professional side panel left  
Professional side panel right  
Designer side panel left  
Designer side panel right  
45 (20.2)  
45 (20.2)  
45 (20.2)  
45 (20.2)  
Side Panel Hardware Kit  
• For use with Designer built-in refrigerator/freezers  
• Hardware allows installation of custom side panels  
• Kit includes brackets, screws, and installation instructions to mount panels on left and right side  
Model  
Description  
Approx. ship wt. lbs. (kg)  
SPHKDS  
Side panel hardware  
3 (1.4)  
Top Panel Kit  
• Stainless Steel (SS)  
• Panel provides finished, freestanding look; unit must still be secured to the wall  
• Kit includes one panel and installation hardware  
Model  
Description  
Approx. ship wt. lbs. (kg)  
TOP-30  
30”W. top panel  
21 (9.5)  
Top Grille Kits  
• Stainless Steel (SS)  
• 60”W. top grille kit—for use with installation of two 30”W. all refrigerators/all freezers side-by-side  
• 66”W. top grille kit—for use with installation of one 30”W. and one 36”W. all refrigerators/all freezers side-by-side  
• Grille creates a single unit look  
• Kit includes one full-length grille, center cabinet trim connector, and all installation hardware  
Model  
Description  
Approx. ship wt. lbs. (kg)  
PGK60-SS  
PGK66-SS  
DGK60-SS  
DGK66-SS  
Professional 60”W. grille (for two VCRB/VCFB units)  
Professional 66”W. grille (for two VCRB/VCFB units)  
Designer 60”W. grille (for two DDRB/DDFB/DFRB/DFFB units)  
Designer 66”W. grille (for two DDRB/DDFB/DFRB/DFFB units)  
21 (9.5)  
23 (10.4)  
21 (9.5)  
23 (10.4)  
Center Trim Kit  
• Stainless Steel (SS)  
• Kit includes center cabinet trim connector to install two custom front units with wood top grille  
Model  
Description  
Approx. ship wt. lbs. (kg)  
FCTK-SS  
Center trim  
5 (2.3)  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
REFRIGERATION  
Built-In 30”W. All Freezer  
Handle Kits  
• For use with custom front freezers  
• For use on locally supplied custom front panels  
• Handles allow refrigerator/freezers with custom front panel to coordinate with other Professional and Designer products  
• Kit includes handle(s) and installation hardware  
Model  
Description  
Approx. ship wt. lbs. (kg)  
PHK26-SS  
PHK26-BR  
DHK25-SS  
DHK25-BR  
PHKDFBB-SS  
PHKDFBB-SS  
HKFDSS-SS  
HKFDS-BR  
Professional one handle (Stainless Steel)  
Professional one handle (Brass)  
Designer one handle (Stainless Steel)  
Designer one handle (Brass)  
7 (3.2)  
7 (3.2)  
7 (3.2)  
7 (3.2)  
Professional two handles (Stainless Steel)  
Professional two handles (Brass)  
Designer two handles (Stainless Steel)  
Designer two handles (Brass)  
10 (4.5)  
10 (4.5)  
10 (4.5)  
10 (4.5)  
Compliance Information  
WARRANTY SUMMARY*  
Two-year full warranty—complete unit  
• Six-year full warranty—sealed refrigeration system  
Twelve-year limited warranty—sealed refrigeration system (includes compressor, condenser,  
dryer/strainer, evaporator, and connecting tubing)  
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items  
*For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 

Timex Watch 170 095004 NA User Manual
Transcend Information Computer Drive 2B User Manual
TRENDnet Switch TK 207K User Manual
True Manufacturing Company Refrigerator TCGR 50 User Manual
Uniden Marine Radio LTD 950 User Manual
VBrick Systems Server ETV v31 User Manual
Velodyne Acoustics Speaker VA 1250X User Manual
ViewSonic Digital Photo Frame DPX1002WD User Manual
Vox Musical Instrument AD100VT XL User Manual
Wayne Swimming Pool Pump WAP75 User Manual