Viking Ventilation Hood DIPR User Manual

VENTILATION  
Built-In VersaVent™ Rear Downdraft  
Standard Features & Accessories  
All models include  
VIPR161 – 36”W. (fits in most 36”W.  
cabinets*)  
• Downdraft blower systems are  
designed to exhaust airborne  
contaminants when cooking with gas  
or electric cooktops. They can be  
mounted in island, peninsula, or  
conventional wall locations.  
VIPR models include  
• For use with Viking Professional  
cooktops  
VIPR181 – 48”W. (fits in most 48”W.  
cabinets*)  
PROFESSIONAL DOWNDRAFT W/REMOTE  
VIPR101R – 30”W. (fits in most 30”W.  
cabinets*)  
VIPR161R – 36”W. (fits in most 36”W.  
cabinets*)  
VIPR181R – 48”W. (fits in most 48”W.  
cabinets*)  
DESIGNER DOWNDRAFT W/REMOTE  
DIPR100R – 30”W. (fits in most 30”W.  
cabinets*)  
DIPR160R – 36”W. (fits in most 36”W.  
cabinets*)  
• Controls on intake top  
VIPR(R) models include  
• For use with Viking Professional  
cooktops & rangetops* (non-grill, non-  
wok**)  
• Island rangetop must be installed with  
island trim  
• Remote-mounted control installs on  
the countertop prevents you from  
having to reach over cooking surface  
or vessels  
DIPR models include  
• For use with Viking Designer cooktops  
& rangetops (non-grill, non-wok**)  
• Island rangetop must be installed with  
island trim  
• Remote-mounted control installs on  
the countertop prevents you from  
having to reach over cooking surface  
or vessels  
Model numbers  
PROFESSIONAL DOWNDRAFT  
VIPR101 – 30”W. (fits in most 30”W.  
cabinets*)  
• Hidden operation—mechanically raises  
and lowers from countertop with the  
touch of a button  
• When not in use, unite retracts and  
rests flush with the cooking surface  
• Suitable for both island and wall  
installations  
• Choose from interior- or exterior-  
power ventilators (see Installation  
Notes & Accessories)  
• Filter alert (flashing light) reminds you  
to clean filters after approx. 30 hours  
of use  
DIPR150R – 45”W. (fits in most 45”W.  
cabinets*)  
*Remote model must be used when  
installed with VGRT rangetops.  
• Four variable fan speeds ensure  
efficient ventilation  
• Delay/off feature allows operation for  
10 minutes before automatically  
shutting off  
**If installed behind a gas char-grill or  
wok, the warranty will be voided and  
performance may be below expectations.  
When selecting the power and high  
performance of a Viking gas char-grill or  
wok, a Viking 18”H. overhead hood is  
highly recommended.  
Two removable, easy-to-clean mesh  
filters are dishwasher-safe and sized  
Model Options  
VIPR Professional  
Downdraft  
VIPR Professional  
Downdraft w/Remote  
DIPR Designer  
Downdraft w/Remote  
FINISH DETAILS FOR REMOTE MODELS  
• Stainless Steel (SS)  
FINISH DETAILS FOR ALL MODELS  
• Stainless Steel (SS)  
• Black control panel and membrane  
with stainless steel trim  
o
4”W. x 2-1/2”D.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In VersaVent™ Rear Downdraft  
Dimensions & Specifications  
CLEARANCE DIMENSIONS  
1–3/4”  
(4.4 cm)  
2”  
(5.1 cm)  
Countertop  
Cooktop  
Downdraft  
Front to back inside  
cabinet depth  
1/32”  
(0.08 cm  
F
IL  
R
TE  
T
E
R
SE  
to  
1/16”  
)
(
0
.
1
6 cm)  
1/32”  
(0.08 cm)  
to  
1/16”  
.16  
(10.2 cm)  
4”  
(0  
F
IL  
T
E
R
1
2
D
P
N
O
W
3
c
4
m)  
PROFESSIONAL  
PROFESSIONAL &  
DESIGNER W/REMOTE  
Note: Accurate alignment of cooktop and downdraft is necessary to ensure that there is no interference when air vent  
is raised and lowered. There should be a gap of 1/32”–1/16” (.08 cm–0.16 cm) between the back of the cooktop and  
the front of the downdraft cover. Rangetops and Designer cooktops must be used with an “R” model downdraft (with  
remote control) - mounted into the countertop, at least 4” (10.2 cm) from the burners.  
Countertops with a raised lip and/or  
backsplash may not allow enough flat  
space. Installation requires 2” of flat  
countertop behind the cooking surface,  
and 1-3/4” between the back edge of the  
cooking surface and the inside back of  
cabinet. (Viking recommends that  
oversized cabinets be used for easier  
installation. Also, cooktop depth can vary  
greatly, causing the fit of  
applicable) must be placed in the  
countertop. Do not install it directly  
behind or beside a burner or element.  
Distance between the controls and the  
edge of the cooking surface should be 4”  
min.  
Important—If installing in a cabinet with  
same width as your downdraft model, the  
outlet cannot be located on the back wall  
of cabinet. In these cases, the downdraft  
will cover the entire back wall of the  
cabinet, so you must you must either  
• mount the electrical box to a side wall or  
cabinet floor—at least 12” from the back  
wall, or  
• mount the electrical box to a wall stud  
behind the cabinet, where it will not be  
covered by the downdraft, and provide a  
clearance hole in the back wall of the  
cabinet.  
For ducting clearance, check location of  
floor joists, wall studs, electrical wiring or  
plumbing for possible interference.  
cooktop/rangetop and downdraft to be  
tight.)  
The remote mounted control (if  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In VersaVent™ Rear Downdraft  
Installation Requirements  
VIPR Professional  
Downdraft  
VIPR Professional  
Downdraft w/Remote  
DIPR Designer  
Downdraft w/Remote  
UTILITY REQUIREMENTS  
o
o
DUCTING  
6” or 10” round elbow= 6’  
of straight duct  
3-1/4” x 10” to 6” round  
transition= 2’ of straight  
duct  
hardwiring with 2-wire with  
ground, using locally-supplied  
wire, and connected to the  
downdraft plug (included)  
• 120 VAC/60 Hz  
• Check with a qualified and  
trained installer or local codes  
for makeup air requirements,  
if any.  
o
• Max. duct run length (see  
Installation Notes &  
Accessories)  
• For best performance, use the  
shortest length of ductwork  
and a minimum number of  
elbows.  
3-1/4” x 10” 90° elbow= 8’  
of straight duct  
• Max. amp usage (rating does  
not include recommended  
ventilator kit rating—See  
Installation Notes &  
• Never use flexible duct; it  
creates back pressure/air  
turbulence and greatly  
reduces performance.  
Accessories)  
PLUMBING  
• The system will operate most  
efficiently when the ductwork  
does not exceed 40’ of  
equivalent duct. For longer  
duct runs, increase duct size  
and contact a qualified and  
trained installer.  
• Straight runs and gradual  
turns are best; for example,  
each 90° elbow is equivalent  
to 5’ – 10’ (152.4 – 304.8 cm)  
of straight run.  
GAS  
• Not applicable  
• Not applicable  
ELECTRICAL  
• 2’-long power cord with 3-  
pronged plug included  
• Internal blowers require a  
grounded outlet within reach  
of the power cord  
• External blowers require direct  
Model  
Ventilator Kits  
Duct Size  
Max. Amps  
Interior  
Exterior  
VEDV900  
VEDV900  
VEDV900/1200  
VEDV900  
VEDV900  
VEDV900/1200  
VEDV900  
VEDV900  
Interior  
Exterior  
Interior  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
Exterior  
5.7  
5.7  
5.7/3.0  
5.7  
5.7  
5.7/3.0  
5.7  
5.7  
5.7  
VIPR101  
VIPR161  
VIPR181  
VIPR101R  
VIPR161R  
VIPR181R  
DIPR100R  
DIPR160R  
DIPR150R  
VIDV500  
VIDV500  
VIDV500  
VIDV500  
VIDV500  
VIDV500  
VIDV500  
VIDV500  
VIDV500  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
3–1/4” x 10” (8.3 x 25.4 cm) 10” (25.4 cm)  
VEDV900  
4.0  
Note: Proper installation/ ducting is extremely important to ensure maximum performance. Use a qualified and trained installer.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In VersaVent™ Rear Downdraft  
Installation Requirements  
PROFESSIONAL ACCESS REQUIREMENTS & SITE PREPARATION  
1-1/2”  
(3.8 cm)  
1-1/2”  
(3.8 cm)  
27”  
(68.6 cm)  
7/8”  
(2.2 cm)  
1-5/16”  
(3.3 cm)  
2-3/4”  
(7.0 cm)  
7/8”  
(2.2 cm)  
27”  
(68.6 cm)  
27”  
(68.6 cm)  
2-1/4”  
(5.7 cm)  
3”  
(7.6 cm)  
Downdraft: VIPR101R  
Rangetop: VGRT300  
24”  
(61.0 cm)  
18-3/4”  
(47.6 cm)  
Downdraft: VIPR101/101R  
Cooktop: VGSU102  
20-1/4”  
(51.4 cm)  
Downdraft: VIPR101/101R  
Cooktop: VECU106  
28-3/4”  
(73.0 cm)  
28-1/16”  
(73.1 cm)  
30”  
(76.2 cm)  
VIPR101/101R  
1-1/2”  
(3.8 cm)  
1-1/2”  
(3.8 cm)  
33”  
(83.8 cm)  
7/8”  
(2.2 cm)  
1-1/4”  
(3.2 cm)  
2-3/4”  
(7.0 cm)  
7/8”  
(2.2 cm)  
33”  
(83.8 cm)  
33”  
(83.8 cm)  
2-1/4”  
(5.7 cm)  
3”  
(7.6 cm)  
Downdraft: VIPR161R  
Cooktop: VGRT362  
24”  
(61.0 cm)  
Downdraft: VIPR161/161R  
Cooktop: VGCU162  
Downdraft: VIPR161/161R  
Cooktop: VECU166  
20-1/4”  
(51.4 cm)  
18-3/4”  
(47.6 cm)  
36”  
34-3/4”  
34-1/4”  
(91.4 cm)  
(88.3 cm)  
(87.0 cm)  
VIPR161/161R  
1-1/2”  
(3.8 cm)  
1-1/2”  
45”  
(3.8 cm)  
(114.3 cm)  
2-3/4”  
(7.0 cm)  
TOP EDGE  
1/4” (0.6 cm)  
DIA. HOLE  
1/4” (0.6 cm)  
DIA. HOLE  
Downdraft: VIPR181R  
Cooktop: VGRT482  
24”  
(61.0 cm)  
5/8” (1.6 cm)  
DIA. HOLE  
CUT OUT ON DOTTED LINE  
48”  
VIPR181/VIPR181R (121.9 cm)  
REMOTE CUTOUT  
Model  
Downdraft Cutout  
Cooktop Cutout  
Width  
Depth  
Width  
Depth  
VIPR101/101R  
w/VECU106  
27” (68.6 cm)  
27” (68.6 cm)  
27” (68.6 cm)  
2-1/4” (5.7 cm)  
3” (7.6 cm)  
28-3/4” (73.0 cm)  
28-1/16” (73.1 cm)  
30” (76.2 cm)  
20-1/4” (51.4 cm)  
18-3/4” (47.6 cm)  
24” (61.0 cm)  
w/VGSU102  
w/VGRT300*  
VIPR161/161R  
w/VECU166  
2-3/4” (7.0 cm)  
33” (83.8 cm)  
33” (83.8 cm)  
33” (83.8 cm)  
2-1/4” (5.7 cm)  
3” (7.6 cm)  
34-3/4” (88.3 cm)  
34-1/4” (87.0 cm)  
36” (91.4 cm)  
20-1/4” (51.4 cm)  
18-3/4” (47.6 cm)  
24” (61.0 cm)  
w/VGSU162  
w/VGRT362*  
VIPR181/VIPR181R  
w/VGRT482*  
2-3/4” (7.0 cm)  
45” (114.3)  
2-3/4” (7.0 cm)  
48” (121.9 cm)  
24” (61.0 cm)  
*Must use island trim. Rear countertop trim (supplied with island trim) will be used in this installation.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In VersaVent™ Rear Downdraft  
Installation Requirements  
DESIGNER ACCESS REQUIREMENTS & SITE PREPARATION  
1-1/16”  
(2.7 cm)  
15/16”  
(2.4 cm)  
27”  
(68.6 cm)  
33”  
(83.8 cm)  
1-1/16”  
(2.7 cm)  
15/16”  
(2.4 cm)  
2-1/4”  
(5.7 cm)  
2-1/4”  
(5.7 cm)  
Downdraft: DIPR100R  
Cooktops:DECU105,  
DGCU105, or DGSU100  
Downdraft: DIPR160R  
Cooktops: DECU165, DGCU165,  
or DGSU160  
20-5/8”  
(52.4 cm)  
20-5/8”  
(52.4 cm)  
29-1/8”  
(73.9 cm)  
34-7/8”  
(88.6 cm)  
DIPR100R  
DIPR160R  
7/16”  
(1.1 cm)  
42”  
(106.7 cm)  
7/16”  
(1.1 cm)  
2-1/4”  
(5.7 cm)  
TOP EDGE  
1/4” (0.6 cm)  
DIA. HOLE  
1/4” (0.6 cm)  
DIA. HOLE  
20-5/8”  
(52.4 cm)  
Downdraft: DIPR150R  
Cooktops: DECU155 or DGCU155  
5/8” (1.6 cm)  
DIA. HOLE  
CUT OUT ON DOTTED LINE  
42-7/8”  
(108.9 cm)  
DIPR150R  
REMOTE CUTOUT  
Model  
Downdraft Cutout  
Cooktop Cutout  
Width  
Depth  
Width  
Depth  
DIPR100R  
w/DECU105  
27” (68.6 cm)  
27” (68.6 cm)  
27” (68.6 cm)  
2-1/4” (5.7 cm)  
2-1/4” (5.7 cm)  
2-1/4” (5.7 cm)  
29-1/8” (73.9 cm)  
29-1/8” (73.9 cm)  
29-1/8” (73.9 cm)  
20-5/8” (52.4 cm  
w/DGCU105  
w/DGSU100  
20-5/8” (52.4 cm)  
20-5/8” (52.4 cm)  
DIPR160R  
w/DECU165  
w/DGCU165  
w/DGSU160  
33” (83.8 cm)  
33” (83.8 cm)  
33” (83.8 cm)  
2-1/4” (5.7 cm)  
2-1/4” (5.7 cm)  
2-1/4” (5.7 cm)  
34-7/8” (88.6 cm)  
34-7/8” (88.6 cm)  
34-7/8” (88.6 cm)  
20-5/8” (52.4 cm)  
20-5/8” (52.4 cm)  
20-5/8” (52.4 cm)  
DIPR150R  
w/DECU155  
w/DGCU155  
42” (106.7 cm)  
42” (106.7 cm)  
2-1/4” (5.7 cm)  
2-1/4” (5.7 cm)  
42-7/8” (108.9 cm)  
42-7/8” (108.9 cm)  
20-5/8” (52.4 cm)  
20-5/8” (52.4 cm)  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
VENTILATION  
Built-In VersaVent™ Rear Downdraft  
Installation Notes & Accessories  
Interior-Power Blower Kit  
• Stainless Steel (SS)  
• Mounts on any size plenum  
• 3-1/4” x 10” duct takeoff  
• Can transition to 6” round  
• Can run duct to left, right, or down  
• Max. duct run—40’ (12.2 m)  
• Kit includes motor, downdraft plug, and 3-1/4” x 10” collar (for installers who prefer to rivet the ductwork to the  
unit.)  
Note: Exhaust capacity based on tests with 0.1 static pressure. Without applying static pressure (some brands do not),  
CFM could be greatly overstated  
Model  
Description  
Max. amp usage  
Approx. ship wt. lbs. (kg)  
VIDV500  
500* CFM downdraft blower  
4.0  
32 (14.4)  
Exterior-Power Blower Kit  
• Stainless Steel (SS)  
• Mounts on wall or roof (no roof cap required)  
• Comes with 10” round duct takeoff plate, which mounts on any size plenum  
• Max. duct run—50’ (15.2 m)  
• Kit includes motor, downdraft plug, and 3-1/4” x 10” collar (for installers who prefer to rivet the ductwork to the  
unit.)  
• VEDV1200 must be used with VIPR181/181R  
Note: Exhaust capacity based on tests with 0.1 static pressure. Without applying static pressure (some brands do not),  
CFM could be greatly overstated  
Model  
Description  
Max. amp usage  
Approx. ship wt. lbs. (kg)  
VEDV900  
900 CFM downdraft blower  
5.7  
42 (18.9)  
VEDV1200  
1200 CFM downdraft blower  
3.0  
44 (19.8)  
Remote Mounted Control  
• Replaces standard Designer control  
• Gray control panel and membrane with stainless steel trim—coordinates with white Designer cooktops  
• Easy to install  
• Must be mounted into the countertop, 4” min. from burners  
• 4”W. x 2-1/2”D.  
Model  
Description  
Approx. ship wt. lbs. (kg)  
DSRCGY  
Designer remote mounted control (SS/gray)  
1.5 (0.7)  
Compliance Information  
WARRANTY SUMMARY*  
• One-year full warranty—complete product  
• Five-year limited warranty—all ventilator motors  
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items  
*Must use Viking ventilator kits with Viking downdrafts; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide.  
Warranty valid on Viking products shipped within the United States and Canada.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 

TechniSat DVD Player TechniBox VIACAM User Manual
Thermador Cooktop CEM304FS User Manual
Toro Utility Vehicle 07367TC User Manual
Toshiba Computer Drive GMAA0020901T User Manual
TravRoute Laptop CoPilot 2002 User Manual
TRENDnet Network Hardware TPL407E2K User Manual
Triarch Fan CF31020 User Manual
Tripp Lite Power Supply SUPDMB12KHW User Manual
ViewSonic Computer Monitor V212 User Manual
Vulcan Hart Carpet Cleaner VHX10G User Manual