Viking Ventilation Hood VWH3678T User Manual

OUTDOOR—VENTILATION  
Built-In 18”H. Wall Hood  
Standard Features & Accessories  
All models include  
• 27”D.  
power when cooking temperatures  
reach uncomfortable levels  
• Variable speed ventilator controls  
o Separate controls for on/off and  
speed control  
stainless steel for increased rigidity,  
seamless appearance, and easy  
cleaning  
o Separate removable trough catches  
liquefied grease  
• Agency-certified for outdoor use  
o Keeps outdoor air fresh  
o Designed and constructed for damp  
environments  
• Canopy only—must also purchase  
interior or exterior ventilator kit, sold  
separately (see Installation Notes &  
Accessories for recommended Viking  
ventilators)  
• Heavy-duty construction; professional-  
type size, design, and styling  
o Virtually seamless stainless steel  
design with no visible screws  
• Easy cleanup  
• 50-watt halogen lights with dimmer  
control  
o Power switch and dimmer control are  
separate, allowing you to leave  
dimmer at favorite position  
o Commercial-type baffle filter system  
efficiently removes grease and  
heated vapors from the air; especially  
designed for use with commercial-  
type products  
o Design of low-profile filter system  
means less interior hood space to be  
cleaned  
• Heat sensor turns the ventilator on full  
o Canopy interior is completely lined in  
Model Options  
VWH3678T  
36”W. Hood (for 30”W. grills)  
VWH4878T  
48”W. Hood (for 41”W. grills)  
VWH6078T  
60”W. Hood (for 53”W. grills)  
FINISH DETAILS FOR ALL MODELS  
• Stainless Steel (SS)  
• Accessory Rail Option—Front of hood  
(Must be ordered factory-installed)  
o Stainless Steel/Chrome (CR)—Stainless  
steel rail with chrome supports/brackets  
and hooks (included).  
o Brass Trim Option (BR)—Brass  
nameplate, rail, supports/brackets, and  
hooks (included). Brass components  
have a durable protective coating for  
maintenance-free normal use.  
ORDERING INSTRUCTIONS  
If ordering optional decorative rail, specify code at end (VWH3678T-CR).  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
OUTDOOR—VENTILATION  
Built-In 18”H. Wall Hood  
Dimensions & Specifications  
CLEARANCE DIMENSIONS  
66”min.  
(167.6 cm)  
30”min.  
72”max.  
(76.2 c  
(182.9 cm)  
m)  
36”max.  
(91.4 cm)  
36 ”  
(91.4 cm)  
Note: Viking Outdoor hoods must be installed in a covered, non-enclosed area, and should be protected from the elements as much  
as possible.  
The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hood should be installed 4-1/2” (11.4  
cm) plus the distance between the back trim and surface from the back wall. (Note: There is a 3” minimum clearance from the back  
trim to non-combustible surfaces, and a 24” minimum to combustible surfaces.) This will require building the hood out from the wall.  
Any combustible material used for this purpose must be covered with locally-supplied stainless steel. Viking also recommends using a  
backsplash.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
OUTDOOR—VENTILATION  
Built-In 18”H. Wall Hood  
Installation Requirements  
VWH3678T  
36”W. Hood (for 30”W. grills)  
VWH4878T  
48”W. Hood (for 41”W. grills)  
VWH6078T  
60”W. Hood (for 53”W. grills)  
UTILITY  
REQUIREMENTS  
Proper installation/ ducting is  
extremely important to ensure  
maximum performance. Use a qualified  
and trained installer.  
• 10” duct run for 900 – 1500  
CFM  
o Never use flexible duct; it  
creates back pressure/air  
turbulence and greatly  
reduces performance.  
DUCTING  
• Check with a qualified and  
trained installer or local codes  
for makeup air requirements, if  
any.  
ELECTRICAL  
• Hardwire direct with two-wire  
with ground  
• Max. duct run  
• 120 VAC/60 Hz  
o For 1,200 CFM—50’ (15.2 m)  
o For 1,500 CFM—75’ (22.9 m)  
o Duct run length is for  
general reference only; for  
longer duct runs, increase  
duct size and contact a  
qualified and trained  
installer.  
PLUMBING  
Not applicable  
GAS  
Not applicable  
o The 1,500 CFM ventilator  
should be used with longer  
duct runs.  
o Straight runs and gradual  
turns are best; for example,  
each 90° elbow is equivalent  
to 5 – 10 feet (1.52 – 3.05  
cm) of straight run.  
Model  
Ventilator Kits  
Interior Exterior  
Duct Size  
Max. Amps*  
Interior  
Exterior  
Interior  
8.7  
Exterior  
6.1/6.8  
8.8/9.5  
8.8/9.5  
VWH3678T  
VWH4878T  
VWH6078T  
VIV1200  
VIV1200  
VIV1200  
VEV1200/1500  
VEV1200/1500  
VEV1200/1500  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
10” (25.4 cm)  
11.5  
11.5  
*Maximum amp rating for hoods includes recommended ventilator kit rating.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 
OUTDOOR—VENTILATION  
Built-In 18”H. Wall Hood  
Installation Notes & Accessories  
Recommended Ventilator Kits  
• Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty  
• See ventilation product pages (indoor) for more information and additional specifications  
Model  
Description  
Approx. ship wt. lbs. (kg)  
VIV1200  
VEV1200  
VEV1500  
1,200 CFM interior-power  
1,200 CFM exterior-power  
1,500 CFM exterior-power  
43 (19.4)  
53 (23.9)  
47 (21.3)  
Duct Covers  
• Stainless Steel (SS)  
• Constructed of 18-gauge stainless steel  
• 12”D.  
• Extends height of hood by 12”—conceals duct  
Model  
Description  
Approx. ship wt. lbs. (kg)  
DCW36T  
DCW48T  
DCW60T  
Outdoor 36”W. duct cover  
Outdoor 48”W. duct cover  
Outdoor 60”W. duct cover  
11 (5.0)  
14 (6.3)  
24 (10.8)  
Backsplashes  
• Stainless Steel (SS)  
• 30”H.  
• Backsplashes protect the wall space below hood  
• Create a continuous finish between cooking surface and hood  
• Low maintenance, easy to clean  
• Hemmed edges with screw holes  
• Kit includes backsplash and fastening screws  
Model  
BKS36  
BKS48  
BKS60  
Description  
Approx. ship wt. lbs. (kg)  
9 (4.1)  
36”W. backsplash  
48”W. backsplash  
60”W. backsplash  
14 (6.3)  
20 (9.0)  
Compliance Information  
WARRANTY SUMMARY*  
• One-year full warranty—complete product  
• Five-year limited warranty—ventilator motor  
• Lifetime limited warranty—rust through on all stainless-steel components  
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items  
*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide.  
Warranty valid on Viking products shipped within the United States and Canada.  
PLANNING AND DESIGN GUIDE  
RELEASED 12/1/07  
©2007 VRC— INFORMATION SUBJECT TO CHANGE  
V I K I N G R A N G E . C O M  
1 - 8 8 8 - V I K I N G 1  
 

Technicolor Thomson Flat Panel Television 30LB120S4 User Manual
Toshiba DVD Player SD V392SU User Manual
Trattorina Oven VT6 User Manual
Tripp Lite Network Card U207 006 User Manual
Uniden Cordless Telephone DECT2080 User Manual
Uniden Portable Radio UBC 175xL User Manual
Vizio Flat Panel Television E24 C1 User Manual
Vizualogic Car Video System A 2000 User Manual
Vulcan Hart Electric Steamer C24EO3 User Manual
Vulcan Hart Range MG12 ML 52549 User Manual