Wasp Bar Code Scanner SPT 1550 User Manual

NOTE! Setting the correct date and time is  
very important. After a battery change  
always check the date and time to make  
sure it is correct.  
Steps for getting started  
with your SPT 1550  
mobile device  
1. Unpack  
6. Install Software  
Open the box and remove all the pieces from  
their protective packaging  
If you purchased any integrated Wasp  
software with this unit, you should use the  
included CD to install it now. After it is  
installed there is online help that will guide  
you through the integration of the SPT 1550  
and the Wasp software.  
You should have the SPT 1550 unit with a  
stylus, a serial cradle or cable and a printed  
guide to the SPT 1550.  
SPT 1550  
Quick Start  
Guide  
2. Remove the Protective Film  
Remove the protective film from the LCD  
display on the SPT 1550 unit and discard.  
Serial Port Connector  
3. Insert New Batteries  
Refer to page 3 of the QRG SPT 1550  
guide for instructions on how to install the  
batteries.  
4. Connect the Unit to Your  
Computer  
Connect the Serial Port Connector to an  
available serial port on the back of your  
PC.  
5. Power On and Set Up the SPT 1550  
Refer to page 4-7 of the included QRG  
SPT 1550 guide for the power on and  
setup steps.  
© 2004 Wasp Technologies, Inc  
 

Tascam Music Mixer 2488 User Manual
TOA Electronics Telephone TS 200 User Manual
Toshiba CRT Television 15V31 User Manual
Uniden Cordless Telephone DXAI7288 2 User Manual
Uniden Cordless Telephone EXS9600 User Manual
Unified Brands Fryer Braising Pan User Manual
USRobotics Network Router US Robotics SureConnect ADSL Ethernet USB Router User Manual
Vizio Speaker SB4020EB0 User Manual
Vulcan Hart Electric Steamer C24EO3 User Manual
Weed Eater Blower 530165291 01 User Manual