Waves Speaker MiniWoofer User Manual

Home MiniWooferTM  
User’s Guide  
The Home MiniWoofer is an  
accessory subwoofer system  
for stereo televisions and shelf  
systems. It provides a high  
quality subwoofer solution for  
smaller rooms in apartments,  
bedrooms and offices where a  
complete home theater system  
is inconvenient. The Home  
MiniWoofer is easier to install,  
can easily be set up  
unobtrusively on a shelf, and  
requires no additional user controls after set-up.  
The Home MiniWoofer lets you hear deep, natural and undistorted bass response to about  
40Hz similar to large home theater subwoofers. It is against the Laws of Physics to create  
40Hz bass from such a small, light weight and low power product, but the Home  
MiniWoofer lets you hear bass frequencies down to 40Hz by using an acoustic illusion  
based on the psychoacoustic Phenomenon of the Missing Fundamental. This is  
conceptually similar to perceiving a full color spectrum from only red, green and blue pixels  
on your television display,  
Waves, the world leader is signal processing tools to audio professionals has extensively  
researched how to optimize this process and patented its MaxxBass® psychoacoustic  
bass extension. This technology has been used in top music recordings for many years  
and now it available in consumer electronics.  
Home MiniWoofer  
1
 
The Sub input is a direct subwoofer input without any low pass filtering. Use this input if  
your television or shelf audio system has a subwoofer output, which provides this  
functionality.  
Plug in the external power supply to an AC outlet and to the rear of the MiniWoofer labeled  
15VDC. Proceed to the Settings section for one time set-up of controls on the rear of the  
system.  
2) Left and Right Input Connections  
The Left/Right Input Connections should be used with stereo televisions that do not  
provide line-level subwoofer outputs.  
The Home MiniWoofer provides Left and Right RCA connectors for line-level (2Vrms)  
input, which are common on DVDs, VCRs and cable/satellite set-tops boxes. Simply  
connect both Left and Right line-level outputs from these audio source components using  
two RCA “Y” cables (not provided) connected to the both the Home MiniWoofer and your  
television.  
Left/Right Input Connections with Stereo Television  
Stereo  
Television  
Right Left Video  
Two “Y” RCA cables  
Left and Right inputs  
Audio Source  
-DVD or VCR  
Right Left Video  
-Cable or satellite set-top  
Home MiniWoofer  
3
 
The Left and Right line-level inputs include a 100Hz Low Pass Filter, so that the Home  
MiniWoofer only reproduces the audio content at 100Hz and below, which is not normally  
heard on most televisions with built-in speakers.  
Connect external power supply to AC outlet and 15VDC connection on the rear of the  
system. Proceed to Settings sections for adjusting rear controls.  
3) Multiple Home MiniWoofers  
The Home MiniWoofer provides sufficient bass sound to fill a moderated sized room such  
as in an apartment, bedroom or office; however, if you want even more bass performance,  
it is simple to connect more than one Home MiniWoofer into an audio system. This is best  
to do with the Sub Input connection.  
The user will need to purchase additional RCA Y connectors to connect all the Sub Inputs  
to a single Subwoofer line-level output.  
.
Home MiniWoofer Settings  
After the input and power cables have been connected, set the Intensity and Level controls  
to mid-point so that both yellow lines point up. It is best to use music with strong bass  
content to adjust the controls.  
For proper performance, it is important to set or tune the settings on the Home MiniWoofer.  
This section recommends initial settings, after which you can adjust these settings further  
for optimal listening.  
1) POWER switch  
Turn the power switch to AUTO. The power LED will be green when the Home  
MiniWoofer is active. The LED will turn red if the Home MiniWoofer goes into power-down  
mode. This occurs if no audio signal has been received for several minutes. The system  
will activate automatically from power-down once a signal is received, so there is no  
reason to turn off the Home MiniWoofer manually.  
2) LEVEL control  
This control is a signal attenuator for input as well as an output volume/level control. Turn  
up the music or movie to the volume at which you normally listen. Set the LEVEL control  
to an appropriate level so that the subwoofer level matches the main speaker outputs.  
Note:  
The Home MiniWoofer can also accept low-level signals (1Vrms) from PCs and portable  
CD/DVD players. Most home audio equipment provides 2Vrms output, so that the  
Home MiniWoofer  
4
 
maximum LEVEL setting with home audio equipment may create clipping. If the sound is  
distorted, reduce the LEVEL setting.  
3) INTENSITY control  
The INTENSITY control provides an input to the patented MaxxBass algorithm on the level  
of the effect. Increase the INTENSITY control until you obtain the desired level of bass  
effect. When the INTENSITY control is set at the minimum position, the MaxxBass  
function is bypassed.  
4) PHASE control  
The PHASE control allows the subwoofer waveform to be inverted. You can set it in either  
position for optimal listening.  
Home MiniWoofer  
5
 
Why use MaxxBass?  
MaxxBass allows a small, low-power subwoofer to provide similar acoustic performance of  
larger, more expensive subwoofer systems. With the Home MiniWoofer, you can add  
subwoofer performance to any television or stereo system to dramatically improve the  
emotional impact of music, movies and games. It is easy to set up and use and provides a  
home theater experience without the cost and complexity of a large home theater system.  
Why is MaxxBass Better?  
MaxxBass is NOT a traditional bass boost technology. Bass boost technologies try to  
compensate for lack of bass frequency range by equalizing or increasing the relative  
volume of the frequencies near the speaker limit. This increases amplifier and speaker  
excursion limits, which can damage the system at high levels and destroys the intended  
frequency balance of music.  
MaxxBass uses proven psychoacoustics effects on how you perceive sound to allow you  
to hear more bass without having the audio system physically generate it.  
It provides up to 1.5 octaves of increased bass range.  
It does not change the frequency balance of the music, and sounds more  
natural than large bass boosts.  
It does not require more amplifier power and speaker excursion.  
It has been used for many years in professional audio recording.  
What is MaxxBass?  
MaxxBass is a patented audio technology that is dramatically changing consumer audio  
products by allowing “more bass from less space.” It extends the bass frequency range by  
allowing listeners to perceive bass frequencies more than an octave below the physical  
limitations of speaker systems. In the Home MiniWoofer, the physical low frequency roll-  
off is 90Hz, but with MaxxBass, you can hear bass frequencies below 40Hz.  
This is accomplished using the science of psychoacoustics. By building audio systems  
optimized for how you perceive sound, performance is improved significantly. This is  
analogous to televisions which only display red, green and blue dots. When you view  
these displays, your visual perception combines these dots to make a full color spectrum  
without needing to reproduce all the necessary color frequencies.  
Unlike other bass technologies, MaxxBass delivers more perceived bass while  
simultaneously reducing the likelihood of damaging speakers and amplifiers. MaxxBass  
also delivers this extended bass without any perceived distortion. MaxxBass technology  
has been used for years by professionals who mix and master the world’s most popular  
music.  
Home MiniWoofer  
6
 
How does MaxxBass work?  
MaxxBass utilizes a psychoacoustic phenomenon called the Missing Fundamental effect,  
which takes advantage of how your hearing works in perceiving sound. MaxxBass  
generates a precise harmonic content so your ear believes it is hearing lower frequency  
sounds than are physically present.  
MaxxBass first implements a crossover at the MaxxBass Frequency. The Home  
MiniWoofer uses a MaxxBass Frequency of 63Hz. The low pass filter (LPF) output of the  
crossover provides the bass signal, which is below the bass frequency response of the  
system. This is the signal to be reproduced psychoacoustically, and only this signal  
receives the MaxxBass processing. Unlike bass boosts, MaxxBass does not add or  
change the processing of higher frequencies that can be reproduced by the system.  
MaxxBass does not change the artist’s sound mix.  
MaxxBass uses a patented digital signal-processing algorithm to calculate precise  
harmonic content information, which is added back into the LPF signal. The combined  
LPF and harmonics output is high pass filtered, removing the original bass signal. The  
signal is then added back into the original HPF signal, and the final output provides a  
signal that sounds like the original, but no longer has unreproducible low frequencies.  
MaxxBass Signal Flow  
Input  
HPF  
Output  
Cross-  
Over  
63Hz  
+
LPF  
LPF +  
Harmonics  
MaxxBass  
Harmonics  
HPF  
63Hz  
Input Signal Example  
MaxxBass Harmonics  
Home MiniWoofer  
7
 
Home MiniWoofer Features  
Similar acoustic performance to moderate home theater subwoofers  
Small size and light weight allow convenient positioning  
Simple connections to existing TV and stereo systems  
No need for additional remote controls  
Automatic power up and power down  
Home MiniWoofer Specifications  
Physical Low Frequency Response  
Perceived Low Frequency Response  
Loudness (SPL C-weighted)  
Dimensions (speaker only)  
Weight (with external supply)  
Peak Power  
90 Hz  
<40Hz  
>100 dB  
8 x 8 x 8 inches  
< 10 lbs  
57 Watts  
MaxxBass is a patented technology of Waves Ltd.  
MaxxBass® and Maxx® logo are registered trademarks of Waves Audio Ltd.  
MiniWoofer and More Bass. Less Space are trademarks of Waves Audio Ltd.  
Home MiniWoofer  
8
 
Home MiniWoofer  
9
 

Tektronix Computer Hardware 070 9180 01 User Manual
Texas Instruments Automobile Accessories TMS320VC5402 User Manual
TIMEX Weather Products Clock Radio T311 User Manual
Tripp Lite Computer Hardware N252 048 User Manual
Tripp Lite Surge Protector 932005 User Manual
Uniden Cordless Telephone DECT 1812 User Manual
Viking Refrigerator DFSB542D User Manual
Vivotek Digital Camera IP7132 User Manual
VTech Handheld Game System v motion active learning system User Manual
Waves Network Card MV360 User Manual